Exotek MC-500N Moisture Meter for Wood and Building Materials
MC-500N MOISTURE SCANNER (NON DESTRUCTIVE)
for Wood and Building Materials with measuring depth up to 1.6 inch.
The new MC-500N is a microprocessor-controlled hand-held instrument. Its reliable, easy to use and provides a faster and non-destructive evaluation of the compare moisture of wood and building materials.
The MC-500N can be used in production, at home or on construction sites for the control and inspection for the detection of water damage.
By measuring a few points, first determine the lowest value of a material, in order to find moist spots, when higher values are displayed.
Reading the measured values in percent over the evaluation table on the front panel.
Application examples for moisture meter MC-500N:
All kinds of wood, chip board etc.
Gypsum fibre boards, Ytong
Bricks, Tiles, Clinker
Eternit slab, Plaster
Sandstone, Limestone
Concrete, concrete slab
TECHNICAL SPECIFICATION | |
MEASURING PRINCIPLE: | Capacitive field, |
MEASURING RANGE: | 0- 59.8% |
MEASURING ACCURACY: | ± 1 % |
SCANNING DEPTH: | 0 - 40 mm |
AUTOMATIC SHUT DOWN: | Yes |
BATTERY WARNING: | Yes |
WORKING TEMPERATURE: | -10°C/+60°C |
DISPLAY: | LCD graphical with back light |
RESOLUTION: | 0,1% |
CASING: | ABS Plastic |
SENSOR: | PCB bottom sensor |
BATTERY: | 9V alkaline |
EAN code | 4250686715002 |
SIZE (L x W x H ): | 104 x 64 x 24 mm |
WEIGHT (INCL. BATTERIE): | 110 g |